TenTec
[Top] [All Lists]

Re: [TenTec] Off Topic - Millen Grid Dip Meter Manual needed Model 90652

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Off Topic - Millen Grid Dip Meter Manual needed Model 90652
From: Carter <k8vt@ameritech.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 04 Nov 2008 17:45:47 -0500
List-post: <mailto:tentec@contesting.com>
Bill Mellema wrote:
 Ron:

 Thanks for the response..the BAMA link is not working...I have the
 schematic...just need the operation manual...

Bill,
Several comments:

1)Many times, the BAMA main site appears not to work. This is because they can only accommodate a very few users at one time. This is why they set up a mirror site.

Go to the BAMA main page; this should always work. Scroll down to "Edebris" (cute name!) -mirror- site. Click on it or go directly to:

http://bama.edebris.com/manuals/

This site virtually always works.

2) Go to "millen"; then choose "90651". I am not sure how this differs from the 90652 you are looking for.

3) The 90651 info contains the schematic AND the operating instructions. As another poster has stated, the "operating" part of the manual should be virtually identical to that of the 90652.

Good luck!
Carter,  K8VT

<Prev in Thread] Current Thread [Next in Thread>