Diodes in the SWR bridge on the LPF board may be leaking.
Phil C. Sr.
k4dpk
----- Original Message -----
From: "Jeff" <n3jbh@yahoo.com>
To: <tentec@contesting.com>
Sent: Wednesday, December 17, 2008 7:46 PM
Subject: [TenTec] Omni 6 Opt-3 gaining power out
Omni 6 Opt-3 gaining power out
Ok I have a rather odd problem. My Omni6 Opt-3 really has two problems I
guess
The built in meter is only showing about 60 watts out in any mode I try.
Yet my trusted external meters show 125 watts out put. The day the
internal meter started showing me 60 watts is the same time the external
meters started showing me 125 watts, The rig use to show around 98 watts
all the time. Any idea whatʼs up?
The power supply reading is close to what I would expect 14 volts @ 18
amps on cw.
Perplexed and confused any advice? Jeff
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|