TenTec
[Top] [All Lists]

Re: [TenTec] Transformer and schematic help needed

To: <geraldj@storm.weather.net>, "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] Transformer and schematic help needed
From: "Roger Hughes" <roger.h@comcast.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 30 Dec 2008 14:24:56 -0600
List-post: <mailto:tentec@contesting.com>
HI gerald. Old heathkit SB23b. I can't remember model. for transformer. Also the SB-200 heath amp can be easilly converted to 6m Amp. My friend did one, but I have no idea. He got the mod off the web.Each one if those should be cheap. They may be worth a check. 73 Roger. ----- Original Message ----- From: "Dr. Gerald N. Johnson" <geraldj@storm.weather.net>
To: <tentec@contesting.com>
Sent: Tuesday, December 23, 2008 12:17 PM
Subject: Re: [TenTec] Transformer and schematic help needed


On Tue, 2008-12-23 at 09:05 -0800, Jeff wrote:

Wanted Transformer close to 1500V @.750Ma

Hello Folks I am looking for a transformer that is 120 volt primary and around 1500 volts on secondary with at least .750Ma rating. I do not want any microwave oven transformer’s… Also don’t want any expensive PW Dahl type I simply can not afford them although I wish I could. I am retired and on fixed income and I am trying my best to make home brew 6 meter amp running a trio of 4CX250B tube’s And all I need is now to make the power supply. Any help would be most appreciated.

Any one having great schematics they would send of a power supply would be great to.
Many thanks and Merry Christmas to all. Jeff


So you wish a DC supply that puts out about 2 KV at 3/4 amp DC? That's a
lot of power on a 120 volt line, especially figuring the line current
waveform won't be nice, but will be peaked from the capacitor input
filter.

Look for something like a Dentron MLA-2000 or 2500. It ran a pair of
8121 at about that voltage and current. New PA tubes are a serious
expense so a used amp needing tubes tends to sell fairly cheaply.

Look for a collection of control transformers with 600 volt and 480/240
primaries. Run them backwards with the primaries in series to get 750 or
so volts for a voltage doubler. What you save in transformers though
will be eaten up in filter capacitors.

Last I heard Dahl was retiring due to health problems and closing the
business so that source may be totally gone, except used.

73, Jerry, K0CQ

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec



--------------------------------------------------------------------------------



Internal Virus Database is out of date.
Checked by AVG - http://www.avg.com
Version: 8.0.173 / Virus Database: 270.8.0/1719 - Release Date: 10/10/2008 4:08 PM


<Prev in Thread] Current Thread [Next in Thread>