Hi
I've come across this old posting from 2005, and my Omni D has the same
trouble on 80m only. Before I go ahead and order a new crystal, can
anyone confirm that this is indeed the cause of the problem?
Many thanks, Dave G4BUO
> bsd crystal? All other bands ok/
> ----- Original Message -----
> From: "Patti" <pthielking at earthlink.net>
> To: <tentec at contesting.com>
> Sent: Saturday, December 24, 2005 14:23
> Subject: [TenTec] HInts for troubleshooting an OMNI D
>
>
>> Intermittantly, while operating on 80m (sending or just receiving) my
> OMNI D will fade out, with
>> the display simply reading 1.000. Once this occurs, you can no longer
> send and receive.
>>
>> Turning the power off momentarily, or changing bands seems to help, for a
> short duration.
>> This behaviour only occurs on 80.
>>
>>
>> Any ideas on where to start looking? From reading the manual, I
> considered the VFO AMP board, although this is not band dependant.
>>
>> Any ideas would be appreciated. I can be contacted off list as well.
>>
>> Thanks
>> Eric Thielking
>> NC2W
>>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|