Ed,
Thanks for your help with the sidetone on Century 21. I put a small, 100K
trimpot across R1
and now I can adjust the sidetone. Also pulled the speaker audio out
through a closed-circuit
quarter inch phone jack so I can feed the C-21 through QF1-A audio filter
and outboard
audio amplifier.
73
George, W4GFA
----- Original Message -----
From: "Ed" <w3nr@comcast.net>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Friday, August 21, 2009 4:29 PM
Subject: Re: [TenTec] C-21
George Allgood wrote:
Recently, I found a Century 21 and let it "follow me home".
Rebuilt the PTO and cleaned her up a bit and now, she's working like a
charm.
I'd like to change the frequency of the sidetone. The sidetone is plenty
loud enough,
but the pitch is a bit low. The tone is generated from an IC on the
pre-amp board.
Has anyone done this?
Thanks
George, W4GFA
R1 controls the sidetone frequency. It will be either a 68k or a 47k. I
put a variable pot in temporarily to determine what I wanted. Measured
the pot and used a fixed value.
Ed W3NR
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|