TenTec
[Top] [All Lists]

Re: [TenTec] Argonaut 509 sidetone "pop"

To: tentec@contesting.com
Subject: Re: [TenTec] Argonaut 509 sidetone "pop"
From: Ed <autek@comcast.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 10 Oct 2009 07:29:48 -0400
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
On Fri, 9 Oct 2009 22:23:20 -0500
Ed - K9EW <k9ew57@gmail.com> wrote:

> Hi Gil,
> 
> Yes, the T/R switching line in the 509 really wants to see a good
> solid ground for proper operation.  I've had to try various keyer
> output transistors to get decent operation.  No problem with a manual
> key.
> 
> I have heard of others with the same or similar problems, and the
> solution always seems to point to getting a very low voltage drop to
> ground for proper operation of the T/R line.  So I would suggest
> trying different transistors in the output of your keyer.
> 
> Let us know what you find.
> 
> 73,
> ed - k9ew
> www.k9ew.us


I ended up using a reed relay on my 509. HTH


Ed W3NR
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>