TenTec
[Top] [All Lists]

Re: [TenTec] Help with Ham Radio Deluxe and Orion

To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Subject: Re: [TenTec] Help with Ham Radio Deluxe and Orion
From: "John T. Fleming" <john@w3gqj.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 12 Oct 2009 18:36:19 -0400
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
I think the confusion here is the 712 is strictly a USB sound card connector
and has circuitry to create a PTT signal for the AXC PTT connection based on
sound being created in the USB adapter.

HRD needs the full serial connection to the back of the Orion because
digital information is sent both directions based on the program polling the
radio or sending data to the radio to do something in the computers in the
radio.

73,
John

-----Original Message-----
From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
On Behalf Of jack User
Sent: Monday, October 12, 2009 5:43 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Help with Ham Radio Deluxe and Orion

one can use a serial to USB adapter just fine for the Orion. no serial
port needed in my experience to read the rig or key the rig. i use a
serial to USB cable for either or both opertions. software is LOGic8 and
MixW2.

jack ak7o


On Sun, 2009-10-11 at 21:57 -0700, John Sheeley wrote:

> Dave
>  You Still need to have your Orion II hooked to your computer through the
serial port for rig control . The sound card interface just you run digital
modes .It does not control the rig.
> 73
> John wb4qda
> 
> 
> 
> ----- Original Message ----
> From: Dave Garner <dgarner@usit.net>
> To: tentec@contesting.com
> Sent: Sun, October 11, 2009 4:13:10 PM
> Subject: [TenTec] Help with Ham Radio Deluxe and Orion
> 
> Has anyone had experience with using Ham Radio Deluxe and an Orion II?
> 
> I have it working fine with the PSK program in HRD but for some reason the
> rig control program in HRD is not seeing the rig when first entering the
> program.  I have tried several different settings on the com ports and
> other. 
> I am using the new Ten Tec Model 712 USB soundcard digital mode adapter.
It
> is an easy hookup and seems to be working on all of my digital programs
but
> HRD rig control.
> 
> Any one using the 712 with an Orion II?
> 
> Thanks and 73,
> 
> Dave
> K4YRK
> 
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 
> 
> 
>       
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>