That's the way it is supposed to work. High cut just needs to change the
bandwidth because all the filters have the same locut frequency.
Carl Moreschi N4PY
121 Little Bell Drive
Hays, NC 28635
www.n4py.com
----- Original Message -----
From: <ac9s@mchsi.com>
To: <tentec@contesting.com>
Sent: Saturday, November 21, 2009 10:28 PM
Subject: [TenTec] O2 - High/Low Cut Anomaly
Although I rarely use the the "Cut" control, I was playing with it today
and noticed that "high" and "low" cut seem to have different actions. Low
cut appears to act as advertised, with the passband shifting and bandwidth
changing in tandem as the control is rotated. The "high" cut appears to
only change the bandwidth. Thinking this might be related to the sideband
I tried both lower and upper sideband with the same result. I am using
the current Beta - 2.041XT.
Anyone else notice the same behaviour?
Thanks --
Keith
AC9S
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|