I believe the replacements are common 1N34s.... I sold my working Omni D to
a good friend who just became a Ham and two weeks afterward, its power
dropped off. He called TenTec and was told to go to Radio Shack and pick up
a package of 1N34s and replace the diodes on the SWR board. Being a new ham
with little repair experience, he was initially reluctant, but received the
typical outstanding support of TT techs and repaired his first radio with
much pride.
--------------------------------------------------
From: "Dr. Gerald N. Johnson" <geraldj@weather.net>
Sent: Saturday, January 09, 2010 1:42 PM
To: <tentec@contesting.com>
Subject: Re: [TenTec] OMNI VI - Low Power output
> On Sat, 2010-01-09 at 11:20 -0800, Dennis Ashworth wrote:
>> The power output of my OMNI has dropped to around 30 watts, as measured
>> on the OMNI front panel and an external power meter. The collector
>> current (as displayed to front panel meter) is about 15 A. SWR
>> indication on the front panel is incorrect, indicating 3:1 into a dummy
>> load -(1:1 indicated on the external power meter).
>>
>> Any ideas?
>>
>> Tnx
>> Dennis, K7FL
>
> ALC/power detector diodes. I've heard of it before.
>
> 73, Jerry, K0CQ
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|