As a quick refresher for those who may have missed it, Hayseed Hamfeest
Co. has temporarily suspended taking factory orders for *twist-tab*
mount electrolytic can capacitors.
This is due to the loss of one of the factory's parts sources. It will
remain as such until the process of tooling up for in-house production
is complete.
Our stock of can capacitors on hand has been decreasing at a rapid rate.
We now are in a situation where we have at least one of each of the
following on hand or arriving shortly:
Drake:
2-A
2-B
2-C
2-NT
R-4A (3-section only)
R-4C
(See below for more Drake info)
Hallicrafters:
S-20R/S-40(A-B)/S-85/SX-99/SX-110
S-53
SX-43/SX-96/SX-100/SX-101/SX-115
Hammarlund:
HQ-129X
Heathkit:
DX-100/TX-1
HR-10/HR-10B
SB-301/SB-310
SB-401
SB-620
Collins:
R-390/R-390A Plug-in caps
We are attempting to secure a small number of kits for the TR-3/early
TR-4 which can also be used for the T-4X series. Also we're trying to
come up with a few TR-4C kits. Unfortunately we can't guarantee that we
will be successful in our any of these attempts. We will keep the lists
apprised of any progress that is made along those lines.
We are able to take orders for stud-mount (NC-100, etc.) and tubular
(AA5,S-38 etc.) capacitors.
If you're interested in any of these capacitors, please respond to the
*following* address:
sales@hayseedhamfest.com
Thanks very much for your support. We have sold over 800 cans and kits
in the short time we have been offering them. We are endeavoring to get
tooled-up and into full production again as soon as possible.
73,
Tom NØJMY, Head Hick
Hayseed Hamfest Co. . .
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|