TenTec
[Top] [All Lists]

Re: [TenTec] TT orion AGC Macro V2 program available

To: pa1ap@nextchallenge.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] TT orion AGC Macro V2 program available
From: jfriend31@comcast.net
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 23 Feb 2010 13:07:37 +0000 (UTC)
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>

thank you Onno! 



jack 



ak7o 




----- Original Message ----- 
From: "pa1ap" <pa1ap@nextchallenge.net> 
To: tentec@contesting.com 
Sent: Monday, February 22, 2010 4:45:39 PM GMT -05:00 US/Canada Eastern 
Subject: [TenTec] TT orion AGC Macro V2 program available 

Greetings, 

Perhaps of use for other Orion operators. We have finished developing & testing 
a small windows program (tested on XP, Vista and 7) which allows very quick 
adjustment of threshold and RF gain through graphical user interface. Besides 
regular sliders it also provides S meter buttons associated with combined 
threshold knee point and RF Gain settings. For each Orion firmware the user can 
create own settings associated with S meter values as available through the 
program. Look at main S-meter for undesired signal level (for example S4 band 
noise) and click within the program on S4 or S5... This will adjust threshold 
and RF Gain to "optimized" value with one click. 

At minimum it provides a quick way to adjust threshold and RF Gain in a single 
screen without having to dive into menu etc. Program size is about 350 Kbyte 
and is available through download in yahoo TT 565 forum. Program has been used 
and tested for both Orion 565 and 566 and results are good. 

Best regards, Onno pa1ap 



       
_______________________________________________ 
TenTec mailing list 
TenTec@contesting.com 
http://lists.contesting.com/mailman/listinfo/tentec 
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
<Prev in Thread] Current Thread [Next in Thread>