Re: [TenTec] Dial lamps

["Dr. Gerald N. Johnson" <geraldj@weather.net>]

On 3/12/2010 7:30 PM, CSM(r) Gary Huber - AB9M wrote:
> See 
> http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=%2Fspecs%2Fba9s_1led.htm
>
> Prices are about $2 per LED for BA9S-W which is "blue-white". Note these are 
> available for 6, 12, 28 or 48 Volt AC/DC operation.... You will need to check your TT 
> equipment to see which voltages you need as different radios and amps have different 
> voltage meter lamps.
The Titan III manual schematic shows those lamps run from the 12 volts 
that runs an IC on the meter switch board.
> 73,
>
> Gary - AB9M
73, Jerry, K0CQ