Dennis I just found the readings as received on the first replacement set of
meters I got from TT . 4/27/2005
They were both 2.380 volts with 1 ma through the meter. Everything read with
a Fluke DVM 0.1% meter.
Second set of replacement meters were 2.493 volts at 1 ma . (Took 1.01 ma
for fullscale ) 12/15/2005
BTW I added a 3.3 volt 1/2 watt zener across the meters (2.7 volts would be
OK too) so the meter voltage couod not go above 3.3 volts anymore - that
also damped the meter a bit since the forward diode slopws the decay of the
meter current . I juts solderd them across the meter terminals. (watch
polarity)
73 Hank K7HP
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|