Can't be a missing jumper if the radio works on 15 M. Mine has that
problem when the switch contacts get dirty. TenTec sells a rebuilding
kit for the VFO. On their web site is a PTO rebuild gallery. Not too
difficult, just be patient. Have fun. 73, Tim, W2UI
On 3/25/2010 6:50 PM, John Molenda wrote:
> Number 1 sometimes means the jumper is missing from the back of the radio .
> John kb2huk
> ----- Original Message -----
> From: "Louis Ciotti"<lciotti1@gmail.com>
> To:<tentec@contesting.com>
> Sent: Thursday, March 25, 2010 5:47 PM
> Subject: [TenTec] Omni A - D Series B project
>
>
>
>> Well my latest project arrived today. A TenTec Omni D Series B. It
>> powers
>> up that is a plus I supposes. Current symptoms as of now:
>>
>>
>>
>> 1) Frequency display shows 9.000.0 or 1.000.0, on the 29.5, 29.0,
>> AUX
>> and 3.5 band positions with no TX or RX on these bands
>>
>> 2) The PTO will have to be rebuilt as tuning is super super slow.
>> Never done one, but I believe TenTec still sells the kit still.
>>
>> 3) Some scratchy pots ant switches are going to need some de-oxit
>>
>> 4) The band switch is somwhat stiff when going into the 29.0 and
>> 29.5
>> positions
>>
>>
>>
>> Can I assume problem 1 may be with the band switch???
>>
>>
>>
>> How do I get the PTO out?
>>
>>
>>
>> On the bands that work I get full output power so the finals work. Even
>> made a DX contact to France on 15 meters. While trying it out.
>>
>>
>>
>> Thanks,
>>
>>
>>
>> Lou
>>
>>
>>
>>
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
>>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|