Fine, IF you have a 50 microvolt signal from a handy signal generator.
If like the original poster you don't have such a generator, you punt.
73, Jerry, K0CQ
On 9/19/2010 3:19 PM, Phil Chambley Sr. wrote:
I set 'em up this way:
14200, USB...widest filters...RF Gain 100%, Passband tuning peaked.
NB off, AGC on and fast. 50 uV at the antenna port...Set for S9.
Phil C. Sr.
k4dpk
----- Original Message -----
From: "Jim WA9YSD"<wa9ysd@yahoo.com>
To:<tentec@contesting.com>
Sent: Sunday, September 19, 2010 3:56 AM
Subject: Re: [TenTec] S Meter Problem with Omni V
Maybe these questions can help him hoarse in the proper settings better.
How many Microvolts per S unit should it be set for?
Can that be measured on the back of the meter or at the connect point on
the
board?
Stay on course, fight a good fight, and keep the faith. Jim K9TF/WA9YSD
|