How much power can we run on the OII safely in AM mode?
Thanks,
Lee
-----Original Message-----
From: Ron Castro <ronc@sonic.net>
To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Sent: Mon, Feb 21, 2011 3:34 pm
Subject: Re: [TenTec] Orion II transmit equalization
There is a distinct difference in the monitor sound of AM vs. SSB that
I
have noted for some time on the "Fix List" on my website. It sounds
more
like the sample rates are different with AM getting the short-changed
by a
few dozen kbps! I could be wrong about that, but they do sound
different.
The good news is that the actual on-air AM audio is fabulous and is
better
than some AM broadcast stations I have heard.
Ron Castro
N6IE
www.N6IE.com
----- Original Message -----
From: <Rsoifer@aol.com>
To: <jhenry@tentec.com>; <tentec@contesting.com>
Sent: Monday, February 21, 2011 11:31 AM
Subject: Re: [TenTec] Orion II transmit equalization
> John,
>
> Further to my earlier email, I ran some more tests, listening to
myself on
> an external receiver (actually, an Argonaut V). The difference in
> equalization between AM and SSB did not show up there; both sounded
fine
> with TX
> EQ set to 0 dB. However, the difference was still there on the
Orion
> II's
> internal monitor, with AM sounding more bassy than SSB by about 7
dB.
> So,
> it seems to be a monitor issue rather than a TX EQ issue. I don't
> understand how and why that would happen, but there it is.
>
> 73 Ray W2RS
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|