TenTec
[Top] [All Lists]

Re: [TenTec] Orion II sweep display?

To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Subject: Re: [TenTec] Orion II sweep display?
From: "Duane Calvin" <ac5aa1@gmail.com>
Reply-to: ac5aa@ac5aa.com, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 26 Feb 2011 10:43:51 -0600
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
I don't get it - if the bandscope freezes, how do you know how far to tune?
Is there an annunciator for the VFO setting that tracks your tuning?

        73, Duane

Duane Calvin, AC5AA
Austin, Texas
www.ac5aa.com  
 

-----Original Message-----
From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
On Behalf Of Rsoifer@aol.com
Sent: Saturday, February 26, 2011 10:23 AM
To: tentec@contesting.com
Subject: Re: [TenTec] Orion II sweep display?

Lee,
 
Sounds good to me.  Bring it back, along with the waterfall!
 
73 Ray
 
 
In a message dated 2/26/2011 4:17:46 P.M. GMT Standard Time, kc9cdt@aol.com 
 writes:

Ray,
He is talking about the nice feature (which was removed in  2.044a) that 
freezes the sweep dsplay when you tune so that you can pounce  right on 
the signal your after..I LOVED IT...NOW IT IS GONE  :-(
73,
Lee



-----Original Message-----
From: Rsoifer  <Rsoifer@aol.com>
To: tentec <tentec@contesting.com>
Sent:  Sat, Feb 26, 2011 10:45 am
Subject: Re: [TenTec] Orion II sweep  display?


Tim,

I don't know what you mean by "freezes," but  when I turn the VFO knob  
the
display doesn't move for about one  second.  That's enough for me  to 
tune
close to the desired  signal, if not right on it.  And, yes, the  
display
width is  selectable (in v2.044A).  I usually keep it at 36 kHz,  which 
I  find
useful on CW.  As for the high speed sweep board, the most   recent word 
from
John was that it's still in the design  stage.

73 Ray W2RS


In a message dated 2/26/2011 3:08:04 P.M.  GMT Standard Time,
nz8j@woh.rr.com writes:

I recently bought a used  Orion I after not having an Orion for
many  years and an quite pleased  with the latest firmware and operation.
I really  like the way the  sweep display works now  in that when you 
turn
the  VFO the  display freezes and you can tune to a signal of choice on
the  screen.  It's not as elaborate as some implementations of an  
internal
scope  but I find it to be very useful.

My  question is does the  firmware on the Orion II offer the same
or  similar capability?  Does  it have any other sweep display features  
in
addition to those of the Orion  I?  I would like to have  the ability to
pick a display width as in the  past.

Any word  on the promised "High Speed Display" that  was talked
about in years  past??

I find I am really  enjoying the Orion and am thinking  seriously
of getting an Orion II and  either trading this original  Orion towards
one or selling it to buy one. I  had forgotten how  really nice the CW
operation (QSK in particular) works on  the  Orion.

73
Tim
NZ8J
_______________________________________________
TenTec  mailing   list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec  mailing  list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec


_______________________________________________
TenTec  mailing  list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>