I am having a bit of a problem with my 255 power supply. That is the one
with the speaker that matches the Omni D series.
This started with a shut down due to high SWR. Normally when this happens
the power supply and radio shut down and then recycling the power brings
things back to life. Now, when I turn it back on the fuse on the back that
protects the AC side blows. If I am quick I can watch the amp meter on the
face of the supply go full scale to the right just before the fuse goes so
it seems to be trying to power into a dead short. It is not the radio as I
have hooked my other TenTec supply up and everything works as it should.
Also, it acts the same just sitting on the bench not hooked to anything but
a jumper on the white wires.
Any help would be greatly appreciated.
Jim
K6JEA
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|