As I recall, the Corsair's had a jumper added in each filter's position if it
was not equipped. Do a quick check by taking the cover off and looking at the
500 hz filter position. If the jumper is missing, simply add it. It should be
diagonal in the filter position. Your manual should help with this
Dave
WA3F
----- Original Message -----
From: tubsc66@aol.com
To: tentec@contesting.com
Sent: Saturday, March 26, 2011 6:21:56 PM
Subject: [TenTec] Corsair CW question
Hi everyone, I've added a Corsair to my TT arsenal, its an original grey
version, only has the
stock 2.4 khz filter. Works great in SSB, fantastic receiver, however, when I
switch the mode
switch to cw, the receiver goes silent. Is this due to the absence of a 500 hz
filter or does it
sound like something is amiss? Ive read the manual but cant find this issue
addressed.
BTW, if anyone has a 500 hz filter for sale, please drop me a note, 73's
Chris KC5IIE
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|