The manual for the FT-901DM is available at
http://bama.edebris.com/manuals/yaesu/ft901dm/ which is often a prime
source of manuals.
There is a yaesu forum, at least one of them is at:
Yaesu mailing list
Home: http://mailman.qth.net/mailman/listinfo/yaesu
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Yaesu@mailman.qth.net
Older Yaesu tended to use Molex plugs that can be bought still for such
accessory connections. I don't remember the 901, since I've never owned
one or worked on the rig, just hooked up ALC from a PA for a ham in town
after he'd fried the PA tubes with too much drive running RTTY. I know
that 901 is for sale.
73, Jerry, K0CQ
On 3/29/2011 3:34 PM, BUDW2GLN@aol.com wrote:
> If anyone in this forum happens to have a FT-901DM transceiver. I have a
> question about the Accessory Plug
>
> The manual shows the plug and where it goes (no brainer) and it is shown in
> the "Connection Diagram"
>
> According to the manual, if the accessory socket is not used for any of the
> accessories, this plug is needed to complete the Heater Circuit for the
> three output tubes (Driver& two finals) NOW, I don"t have the physical
> plug..
>
> I can build one but there is no diagram for it......I need to know how the
> plug is wired :-)
>
> Can anyone help me :-).........Is there a Yaesu forum
>
> 73
>
> Bud, W2GLN
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|