Mike,
In my Omni VI opt 3 there is in menu 3 the option CrSP this sets the rate of
the offset tuning knob in CW mode in kHz per turn from 4.8 to .15 kHz in
six steps.
Hope this helps,
73 Gert, PA3AAV
----- Original Message -----
From: "Michael Tope" <W4EF@dellroy.com>
To: <tentec@contesting.com>
Sent: Sunday, September 11, 2011 12:30 PM
Subject: [TenTec] Omni 6+ RIT Tuning Rate
> My frustration with the fast tuning rate on my Ten-Tec Omni 6+ RIT
> function finally exceeded my "I should do something about this"
> threshold last night during the CW Sprint contest. I just changed the
> setting in the hidden options menu 3 (i.e. rSPD) from 4.8 KHz/turn to
> 0.15 KHz/turn. This didn't have any effect on the tuning rate. Is there
> a hardware and/or firmware change that is required to make this
> particular menu parameter function properly?
>
> Thanks,
>
> Mike W4EF.......................
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|