Paul...
Make sure the clock signal is on connector 57 on the display driver board.
That signal comes from the audio processor board.
Phil C. Sr.
k4dpk
----- Original Message -----
From: "Paul" <hglent@frii.com>
To: <tentec@contesting.com>
Sent: Saturday, November 05, 2011 2:32 PM
Subject: [TenTec] Corsair II Keyer in op. Need advice.
> Greeting. Isn't the band openings fun?
>
> My Corsair II Iambic Keyer has stopped working. I have traced it down
> to the Logic Board.
>
> Everything else on the logic Board is working fine. All of the display
> functions are just as they should be. It is just that I can not key
> with the paddles, and the Memory Key don't work.
>
> So I need advice. Should I call Ten Tec and try to buy the MC68705P3, or
> is there any other fix for this problem?
>
> Thanks
>
> Paul K.
> WA0BAG
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|