Hello Barry
About the Key-Input at the Front and Rear from Orion.
Do not key the Orion with Keyer 1 from the Frontconnection and with Keyer 2
from the Rear-Keyerconnection. If you key together with Keyer 1 and Keyer2
you will be destroy the chipresistor at the CPU- Board for the
Keyingcircuit.
Conclusion:
Only key the Orion with Keyer1 or Keyer2, not parallel.
The Keyeroutput from Computer only to the AUX Socket at the Rear for PTT-
Keying..
This is a very important .
Best Reguards
Holger
DJ8HB with Orion 565
eof
----- Original Message -----
From: "Barry N1EU" <barry.n1eu@gmail.com>
To: "Orion565" <orion565@yahoogroups.com>; "Discussion of Ten-Tec Equipment"
<tentec@contesting.com>
Sent: Tuesday, November 08, 2011 11:16 AM
Subject: [english 100%] [TenTec] CW Key inputs on Orion
> Although I've used the Orion for 8 years, I'd like to use the internal
> keyer for the first time. There are key inputs on the front and back
> panels. With internal keyer set to "on", is it possible to connect a
> paddle to one input for the keyer and cw output from a computer to the
> other input that wouldn't go through the internal keyer? I suspect
> the answer is no, but many folks out there probably know for sure.
>
> Thanks & 73,
> Barry N1EU
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|