Wayne: The differences between a 563 and 564 are only minor. My 563 is a rev
3 which makes
electrically the same as a 564. Tentec replaced 3 boards and changed a few of
the front panel
buttons. The boards are the Passband Tuning board in the 563 it's 81600 and
564 it's 81781,
the 9mhz Mixer board in a 563 is 81594 and in the 564 it's 81782, Then they
changed the logic
board EPROMs to 564 devices.
If you print out the interconnect drawing, then make the board # changes and
you'll be up to date.
73 Clayton N4EV
________________________________
From: n2wk <n2wk@rochester.rr.com>
To: tentec@contesting.com
Sent: Sunday, December 11, 2011 4:48 AM
Subject: [TenTec] Omni VI + Interconnect Schematic
Thanks guys, and I hope there is not to much difference between the 563 and the
564 interconnect.
73, Wayne N2WK
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|