What is the chance of "pre-ordering" the RX366?
73,
Troy, W6HV
-----Original Message-----
From: John Henry
Sent: Thursday, January 19, 2012 1:19 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] RX-366?
Hi Everyone,
Just to give you an update. We did make a software improvement this week
that I want to ensure gets fully tested. I want to work it through it's
paces on the contest this weekend. And judge on Monday AM whether the V3
firmware is ready for prime time or not.
Note: We won't ship any RX366's until we know the firmware is solid.
Best Regards,
John Henry
On Fri, Jan 13, 2012 at 12:43 PM, <Rsoifer@aol.com> wrote:
**
Tnx John. I'll be among the first to sign up.
73 Ray
In a message dated 1/13/2012 4:54:35 P.M. GMT Standard Time,
jhenry@tentec.com writes:
Hi Ray,
We are in the final phase of production for the RX-366. All of the boards
have been built as of yesterday. We are going through final
alignment/testing of the hardware as we speak.
Installation procedure/User Manual is basically ready.
Version 3 firmware for both the 565 and the 566 are in the final days of
beta testing. If all goes well, we will be releasing the V3 firmware to
the
general public as an official release next week, and possibly taking
orders
for the RX366 as well.
V3 has been in use in a variety of Orion(s), 565 with RX366s, 565s
without RX366s, 566s with RX366s, and 566s without RX366s. All of the
above
have been used by some serious top level Contesters / DXers in several of
the major contests over this past few months, with exceptional results for
the beta testers. A few have stated we have raised the bar once again.
Even
in their first run Orion 565s.
I am working on a "Version 2 to Version 3" addendum to the manuals (565
and 566). Version 3 brings with it a few very interesting new features,
and
about 30 improvements in features and bug fixes. The new features will
definitely give the very serious DXer and Contestor some new tools to help
them work "more/better/faster/reliably/etc.".
I myself, personally, optimistically put both of them as "shippable" next
week. Just need to ensure that the sales infrastructure/web site is
ready... hi hi hi.
Can you tell? I'm very enthusiastic and anxious to get both of these
available to everyone as soon as possible.
Thanks for asking, soon,
Best Regards,
John
On Fri, Jan 13, 2012 at 11:35 AM, <Rsoifer@aol.com> wrote:
**
John,
Anything by way of an update on the RX-366 and associated firmware for
the Orion II?
Tnx,
Ray W2RS
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|