TenTec
[Top] [All Lists]

Re: [TenTec] Orion - Ver. 3.30 / RF GAIN

To: tentec@contesting.com
Subject: Re: [TenTec] Orion - Ver. 3.30 / RF GAIN
From: "Charles W. Shaw" <charleswshaw@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Fri, 24 Feb 2012 20:19:21 +0000
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Hi from Hobbs, NM:

         Since my subject got changed, I will join the newer version.

         Barry, N1EU, wrote, "It seems like an easier fix would be a 
firmware option to swap AF Gain and
RF Gain controls, although that's out of our control."

         Someone (perhaps Barry) had suggested this before.  I would 
buy it, and I would certainly be happy with it if it only applied to 
the RF Gain of the main RX.  I would also accept the loss of the CUT 
control (as was once suggested) in order to have a dedicated RF Gain 
control.  Perhaps firmware could make this happen only in CW 
mode?  That would not remove where CUT is most useful--on SSB.

         Rick, DJ0IP, suggested an outboard attenuator.  This would 
work electrically; but it would add to the problem of knowing in a 
hurry whether the inboard & outboard switching was all correct for 
the job to be accomplished.  Keep in mind that in DXing we need to 
use the MULTI knob to set CW speed, the power level (to go to and 
from an amplifier), perhaps to adjust the NB or NR level, to adjust 
the notch settings, and now the SAF and other things--as well as the 
most common--RF Gain.

         When I intend to turn the RF up or down a bit and find that 
I have instead changed my CW speed, (having in the rush forgotten to 
return the MULTI to RF after matching the DX's speed) this will 
likely mean I miss a chance to drop my call into the pileup at an 
advantageous split-second.  If I had accidentally left the MULTI on 
PWR, I could (and have) accidentally turn the drive up enough to 
overdrive the TITAN III.

         See what I'm after?  (Rhetorical question.)

73,
Charles Shaw - N5UL
Hobbs, NM

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>