TenTec
[Top] [All Lists]

Re: [TenTec] Orion 2 ver 3.028 and N1MM

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Orion 2 ver 3.028 and N1MM
From: Barry N1EU <barry.n1eu@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sun, 26 Feb 2012 10:33:12 +0000
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
In N1MM Logger, you need to turn on the "dual rx always on" option in the
Config menu.

Barry N1EU

On Sun, Feb 26, 2012 at 10:24 AM, Dave G3RXP <g3rxp@btinternet.com> wrote:

> Good Morning All,
>
> I wonder if there is someone who could point me in the right direction
> with this query.
>
> When switching the TX from A to B VFO manually and back again it works
> fine but when I load N1MM up and select either VFO A or VFO B by pointing
> the mouse at the VFO  header it switches OK but I loose the AUDIO menu
> setup on the Orion and all three selections i.e Left/Right phone and L/S
> default to "Main".
> Im using left headphone - "Main" and right Headphone - "Both" with L/S -
> "Both".
>
> I will be buying the 2nd RX for the Orion and the Audio settings will be
> as above.
>
> 73  Dave G3RXP
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>