TenTec
[Top] [All Lists]

Re: [TenTec] TEN-TEC Community

To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>, TenTec_Eagle@yahoogroups.com, Ten-Tec-Omni-VII@yahoogroups.com
Subject: Re: [TenTec] TEN-TEC Community
From: "Wilford D Lindsey" <qrpnut5@gmail.com>
Reply-to: qrpnut5@gmail.com, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Fri, 27 Apr 2012 18:04:34 +0000
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Rick:

Re taking glare off of shiny things in bright light, I remember in TV work we 
used to have a product in a spray can which we used to take the really "hot 
spots" off of things in scenes.  This goes way back to the days of B&W TV when 
we used HUGE lighting and had to literally employ folks to pull the huge heavy 
camera cables.  Sorry I don't recall the name of the product.

Another thot = photographers sometimes take Kleenex (sic), split the double 
thickness into one, and then place the one thickness over the *flash* of the 
camera.  This cuts down the direct hot light just enuf (while also diffusing 
it) that a lot of the objectionable hot spots caused by flash are magically 
removed.  BUT note = be certain to keep ze feengers outta dee picture.  You 
might simply think of using scissors, a small piece of Kleenex or similar, 
Scotch tape, etc, etc.

Anyway, Good Luck Sir.  And I hope and invite you to post your pics on the 
reflector for all to celebrate!

73,
Doc/K0EVZ

Sent from my Verizon Wireless BlackBerry

-----Original Message-----
From: "Rick - DJ0IP / NJ0IP" <Rick@DJ0IP.de>
Sender: tentec-bounces@contesting.com
Date: Fri, 27 Apr 2012 16:47:40 
To: 'Discussion of Ten-Tec Equipment'<tentec@contesting.com>; 
<TenTec_Eagle@yahoogroups.com>; <Ten-Tec-Omni-VII@yahoogroups.com>
Reply-To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: [TenTec] TEN-TEC Community

Wow, there are really some lovely stations out there.

Only problem is, on most of them I could not recognize who they belong to.

 

Somebody had the idea to put up his call sign on his computer screen.

That's a good idea.

 

I am a failure at photography.

I have taken many pictures of my station, but can't get any of them to turn
out.

There is a huge picture window behind my station and it reflects too much.

Almost every piece of equipment I have is black, and if I turn off the
flash, you can hardly see anything.

 

If anyone has a tip on how to do this, I would be grateful.

 

73

Rick

 

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>