TenTec
[Top] [All Lists]

[TenTec] Paragon 586 Clock Problem

To: tentec@contesting.com
Subject: [TenTec] Paragon 586 Clock Problem
From: Peter Bertini <radioconnection@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sun, 2 Dec 2012 10:19:26 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Your Dallas RTC chip has an internal lithium battery that failed. You will
need to order a new DS-1287 Dallas chip from Ten Tec (20 bucks) and replace
the device. Unfortunately,  it is a 24 pin part that is soldered to the PC
board.  You might as well replace the other Dallas memory chip as well
(DS-1220) since it also has the same battery back up. The internal lithium
cells are only good for 10 ten years. Be very, very careful to buy chips
from a reputable source--there are a lot of out of date parts being sold by
bad vendors, esp. from China.

Pete
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] Paragon 586 Clock Problem, Peter Bertini <=