Should that be uV Mike?
Phil C. Sr.
k4dpk
----- Original Message -----
From: "Mike Bryce" <prosolar@sssnet.com>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Thursday, January 24, 2013 2:22 PM
Subject: Re: [TenTec] Orion II received is down
Elecraft sells a small signal generator, single band( they have several
models) and don't cost a fortune. About $40 or so.
They produce a 50 mV or 1 mV signal on crystal controlled frequencies.
Plug your coax into it. Set output for 50 mV and see if your rec shows
s-9.
Can you hear the 1 mV? If you can then nothing's wrong with the rig.
Mike wb8vge
Sent from my iPhone
On Jan 23, 2013, at 1:56 PM, "Frankie Hunt" <fhunt@bvu.net> wrote:
A 2nd rig comes in really handy here. Just flip a coax switch and listen
on
the other receiver..
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|