TenTec
[Top] [All Lists]

Re: [TenTec] FW: Corsair vs Corsair II

To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Subject: Re: [TenTec] FW: Corsair vs Corsair II
From: "Rick - DJ0IP / NJ0IP" <Rick@DJ0IP.de>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 14 Mar 2013 00:06:45 +0100
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
I also volunteer to create a page on my web site and post Barry's work
there.
Barry, contact me directly and we'll do this together.

73
Rick, DJ0IP

-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Jerry
Haigwood
Sent: Wednesday, March 13, 2013 11:07 PM
To: 'Discussion of Ten-Tec Equipment'
Subject: Re: [TenTec] FW: Corsair vs Corsair II

Steve and Barry,
     After studying the schematic for a while, I think L1, L2, L3, L4, L7,
L8 are all 100 uHy and not 100 mHy.  First, 100 mHy inductors are huge
devices and second that large of value is not needed for the circuits in
questions.  I also question L11, L12.  I suspect they are also wrong and
should be in uHy.  If I have missed any, please let me know.  Barry, after
you compile all the changes to the Corsair II manual, maybe you could
publish it with the corrections?  If you have a scanner, you could just scan
the pages that have problems, put them up on the web as a .PDF and then be a
hero to all of us with Corsair IIs. ;-) Jerry W5JH "building something
without experimenting is just solder practice"




-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Steve Hunt
Sent: Wednesday, March 13, 2013 4:34 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] FW: Corsair vs Corsair II

Barry,

I can't say for certain - I didn't lift them to measure!

They are the same style of component as L5, and clearly the values can't be
8.2mH as shown. It seems likely the same sort of error has been made, but
whether they are 8.2uH or 820nH I'm not sure. If I get a chance tomorrow
I'll take another look at them.

I guess a quick calculation around those LPF component values -
C24/L9/C25/C26 - might also resolve it.

73,
Steve G3TXQ



On 13/03/2013 21:26, Barry N1EU wrote:
> Steve, are L9 and L10 equal to 820nH (0.82uH), and not 8.2mH as indicated?
>
> I've been compiling a Corsair II manual errata so just want to make sure.
>
> thanks & 73,
> Barry N1EU
>
> On Wed, Mar 13, 2013 at 4:13 PM, Steve Hunt <steve@karinya.net> wrote:
>
>

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>