Unless you have a physically damaged roller and associated hardware, I've
found a good cleaning and very light application of contact cleaner will
restore the items to good condition.
As a general practice, never adjust the roller with any significant power
applied. I always use my antenna bridge to make my tuner adjustments.
73
Bob, K4TAX
> Got a nice used(again)238A TT tuner and the roller inductor is getting a
> tad long in the tooth?
> Priced a new one out of TT but can't justify it right now.
> Has anyone installed an aftermarket inductor in their TT tuner?if so,
> can you send me the details. Thanks...
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
--
Disclosure:
I am a Tentec Ambassador and compensated according to the Tentec
Ambassador plan. I serve as a volunteer beta test person for the Omni
VII, Eagle and Argonaut VI products. Otherwise, I hold no business or
employment interest with Tentec.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|