You should rather use a 1:1 current balun Denton.
I personally use a home-brew 1:1 current balun that cost about 1/3 as much
as what most commercial baluns cost.
You can see my balun here: http://www.dj0ip.de/my-station/oklahoma-2010/
(it's the last picture in the gallery).
If you wonder why I say that, then you need to read what the experts write.
I would start with Steve's page: http://www.karinya.net/g3txq/tuner_balun/
.
73
Rick, DJ0IP
-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of denton
sprague
Sent: Saturday, July 27, 2013 5:00 PM
To: Discussion of Ten-Tec Equipment
Subject: [TenTec] which balun?
Thought would start a little poll..
Which balun are you using with your 238 series TT tuners and multi band
antenna?
Currently, I use a balun designs 4214t 4:1 balun to feed my 80 meter
horizontal loop.with 450 ohm feeders.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|