Rick, the Orion was designed LONG before the Eagle was.
"timing"
73
Rick, DJ0IP
-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Rick W
Sent: Sunday, October 13, 2013 6:53 AM
To: Ten-Tec Reflector
Subject: Re: [TenTec] Orion Power Out
As has been discussed by others, I too noticed the Orion power plug was the
same as my Argo V. I noticed that the 100 watt TEN-TEC Eagle uses Power
Pole connectors and felt that if it was good enough for the Eagle why not
the Orion. Converting the Orion to this type of connector has been
described on this list and is on the TEN-TEC Wiki at:
http://www.tentecwiki.org/doku.php?id=orion_molex_to_power_pole_mod
I run #10 wire from my PS to the Orion and it has worked flawlessly for a
couple of years now.
73,
Rick
VE7TK
Website: http://www.ve7tk.com
To:TenTec reflector <tentec@contesting.com>
Subject:Re: [TenTec] Orion Power Out
From:art N4UC <n4uc@hotmail.com>
Reply-to:Discussion of Ten-Tec Equipment <tentec@contesting.com> Date:Sat,
12 Oct 2013 21:15:19 -0500
List-post:<tentec@contesting.com">mailto:tentec@contesting.com>
You are correct. It's because having the most reliable connectors on a radio
is not nearly as powerful a marketing tool as a flashy display with a
gazillion features that nobody actually needs. But since my profession for
the last 40 years has been the design of cable harnesses and connector
interfaces for space
vehicles, I'd rather have a radio that boasted about reliable connectors!
>Date: Sat, 12 Oct 2013 22:00:23 -0400 >From: jrichards@k8jhr.com >To:
tentec@contesting.com >Subject: Re: [TenTec] Orion Power Out > >For all the
high technology that goes into these radios, it seems, to me >at least,
they have done precious little development on the power supply >side. Not
that you can improve on two wires, red and black, but the >connectors all
seem a tad archaic. > >Of course they have done even less to develop...
knobs... ;-) > >(sorry, getting silly) >________________________ K8JHR
__________________ > > >On 10/12/2013 9:54 PM, art N4UC wrote: > >> The only
Kenwood HF radios I've ever owned (930 and 940) just had AC >> inputs, no
DC. But I do like what they do with the vhf/uhf mobile rigs with >> the
pigtail and a connector on the end. >>
>__________________________________________
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|