[TenTec] Orion RX w/ boatanchor TX

[K3GHH <k3ghh@arrl.net>]

I recently revived my first Novice transmitter (built from the 1957 RAH, 
but originally described in a 1953 QST); it uses a 6AG7 at 10w input. My 
plan is to use a coax relay on the antenna terminal of the Orion to 
switch between TX and RX, cranking the RF gain down to use the Orion as 
a transmit monitor (sidetone), as I used to use an SX-99 way back when.
Does this sound safe for the O2? If the method is OK for this little 
rig, I'll probably try it with an AT-1 and a DX-20, maybe eventually my 
DX-100.
--John K3GHH

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec