Barry,
I checked out the Power Dist Board A9 schematics for both the Orion 565 and
Orion II 566 on the Ten-Tec website. Here's what I saw for both:
C3, C4, C5 - 10 uF
C1, C2, C8 - 100 uF
C6, C7, C9 - 470 uF
I own both a 565 and 566 but have not disassembled each to determine the
values of the electrolytic caps actually installed. I am not saying WB2RHM
is incorrect. I'm just going by the schematics on the Ten-Tec website.
Now I wonder what the actual values are?
Marsh, KA5M
-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Barry N1EU
Sent: Friday, March 07, 2014 4:06 PM
To: Discussion of Ten-Tec Equipment; Orion565
Subject: [TenTec] Capacitor replacement on Orion II power distribution board
My Orion II occasionally goes through the sequence of LCD display goes
dark followed by rig rebooting itself. Am I correct in assuming I
need to replace the caps on the power distribution board?
WB2RHM posted this info on the original Orion (565). Does anybody
know if this cap info is identical for the Orion II (566)?
Panasonic, Low-ESR, 50WVDC, 108C electrolytic caps for 565 A9 board:
667-EEU-FR1H221 MFG Part No:EEU-FR1H221 Panasonic Aluminum
Electrolytic Capacitors - Leaded 220uf 50WVDC 108C 1 -C2 $0.39ea
667-EEU-FR1H220 MFG Part No:EEU-FR1H220 Panasonic Aluminum
Electrolytic Capacitors - Leaded 22uf 50WVDC 108C 3 -C3,C4,C5 $0.09ea
667-EEU-FR1H101 MFG Part No:EEU-FR1H101 Panasonic Aluminum
Electrolytic Capacitors - Leaded 100uf 50WVDC 108C 2 -C1,C8 $0.22ea
667-EEU-FR1H471 MFG Part No:EEU-FR1H471 Panasonic Aluminum
Electrolytic Capacitors - Leaded 470uf 50WVDC 108C 3 -C6,C7,C9 $0.69ea
Thanks & 73,
Barry N1EU
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|