The MASTER RESET seems to have alleviated the messy signals the best that I can
tell.
Previous owner didn't use it much and it looks like new, alogn with the 708 mic
etc.
I think I may need a small bypass cap across the ext. speaker line for using
one antenna that
is close to the shack - 30m dipole.
On 9 Jul 2014 at 9:04, bcarling@cfl.rr.com wrote:
> Great, and thanks Paul - I will look up how to check and update the firmware
> later today and
> also see how to adjust the DSP.
>
> Other than that the radio is much more intuitive than most nowadays... is
> there a way to
> change the tuning speed WITHOUT pressing TWO buttons?
>
> On 9 Jul 2014 at 8:32, Paul Gentry wrote:
>
> >
> > I would do a factory reset regardless. Also check to see if the latest
> > firmware has been installed.
> >
> > Paul K4BWG
> >
> >
> > Paul Gentry
> > PO Box 1403
> > Lenoir City, TN 37771
> > phgentry@gmail.com
> > 865-229-6001 Mobile
> > FIGURE OUT WHAT YOU BELIEVE.
> > THERE WILL BE A TEST LATER
> >
> >
> >
> >
> >
> > On Wed, Jul 9, 2014 at 8:06 AM, <bcarling@cfl.rr.com> wrote:
> > Thanks Walt. I don't know how to turn the DSP off yet - or down.
> >
> > Hopefully a reset won't be necessary. I tried adjusting the NB and it
> > did not help.
> >
> > On 9 Jul 2014 at 0:18, Walt K8CV wrote:
> >
> > > Try turning the DSP off or to 1. Check that NB is off or 1. Turn off
> > the preamp! Maybe do a
> > complete reset?
> >
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
> >
> >
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|