TenTec
[Top] [All Lists]

Re: [TenTec] Advice needed: reasonable valuation on Omni D model 546

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Advice needed: reasonable valuation on Omni D model 546
From: Barry N1EU <barry.n1eu@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 27 Oct 2014 05:25:25 -0400
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
We were valuing a rig with filters installed and I think $50 is correct for
a filter installed when you buy the radio.

I wouldn't pay $75 for a 20 year old TT filter unless someone tested it and
confirmed the passband and gain were in spec or else gave the buyer the
right to return it if it was out of spec.

Barry N1EU

On Mon, Oct 27, 2014 at 2:28 AM, Wade Staggs <tvman1954@gmail.com> wrote:

> *Barry,*
> *             Thanks to Ebay, those Filters that you valued at $50.00 each,
> can't be found for less than about $75.00 each..... Just so you will know.*
>
> *                                                                  73 from
> Wade/KJ4WS*
>
> On Sun, Oct 26, 2014 at 1:37 PM, Barry N1EU <barry.n1eu@gmail.com> wrote:
>
> > I agree with Mike's valuations.  If it's a friendly sale and a package
> > deal, I'd use the lower prices in the ranges Mike quoted.  Add $50 for
> each
> > optional filter, providing they are still on spec (a large percentage of
> TT
> > filters are not after that much time).
> >
> > 73, Barry N1EU
> >
> > On Sun, Oct 26, 2014 at 10:25 AM, Mike Bryce <prosolar@sssnet.com>
> wrote:
> >
> > > Personally, I’d go with  $250-$300 for the rig
> > >
> > > $100-$125 for the power supply
> > >
> > > $125-$175 for the vfo.
> > >
> > > Again, value, like beauty, is in the eye of the beholder.
> > >
> > > If there are holes, non-factory knobs, strange mods added, or other
> > > cosmetic issues, then the value is lower.
> > >
> > > if there are extra filters, Inrad filters, noise blanker and or audio
> > > filter, then it’s worth more.
> > >
> > > Has the PTO been rebuilt? Those are about $40 now and it takes a good
> > hour
> > > or so to install one.
> > >
> > >
> > > Mike, WB8VGE
> > > SunLight Energy Systems
> > > The Heathkit Shop
> > > http://www.theheathkitshop.com/
> > > J e e p
> > > o|||||||o
> > >
> > > A man with one clock knows what time it is. A man with two clocks is
> > never
> > > sure.
> > >
> > >
> > >
> > > On Oct 25, 2014, at 9:27 PM, Michael Tortorella <w2iy@verizon.net>
> > wrote:
> > >
> > > > TenTec friends,
> > > >
> > > > Can someone offer some guidance on a reasonable price in a friendly
> > sale
> > > for
> > > > an Omni D series C (546) with the power supply and outboard VFO?  All
> > > are in
> > > > excellent shape and recently used.  Any thoughts greatly appreciated.
> > > >
> > > > 73
> > > > Mike W2IY
> > > >
> > > > _______________________________________________
> > > > TenTec mailing list
> > > > TenTec@contesting.com
> > > > http://lists.contesting.com/mailman/listinfo/tentec
> > > >
> > >
> > > _______________________________________________
> > > TenTec mailing list
> > > TenTec@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/tentec
> > >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
<Prev in Thread] Current Thread [Next in Thread>