TenTec
[Top] [All Lists]

[TenTec] Argonaut VI...first impressions

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: [TenTec] Argonaut VI...first impressions
From: "Lee WA3FIY" <wa3fiy@radioadv.com>
Reply-to: wa3fiy@radioadv.com, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 11 Apr 2015 10:29:23 -0400
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Argonaut VI first impressions...........

WOW!  :-)

That's my first impression of my new Argonaut VI (A6).  This is without a doubt 
one 
of the nicest most enjoyable radios I have owned in my 50 years of ham radio, 
and I 
have owned many.  It has exceeded (nearly) all of my expectations.

It is easy to learn and easy to use and provides top notch receive performance. 
 I'm 
unable to comment on voice mode operation as I'm nearly deaf and don't do 
voice, 
but CW and digital operations are absolutely outstanding.  The signal quality 
on my 
digital signal is the best I have seen from any of my rigs, even at full power 
output 
which is where I run it most of the time.  More on output power shortly.  All 
the 
controls have a solid feel.  I especially like the tuning knob.  No cheap 
plastic here.  
:-)  Although the radio is small, I find it easy to operate each control.  
Every function 
I need is available and works well.  The output transistors are very robust and 
should hold up well under most any operation.  The output stage does not fold 
back 
under high swr conditions from what I can tell.

Ten watts is enough power for most of my operating but there are times when I 
need a little more.  For those times I use a HR50/AT amplifier for fifty watts 
output 
or a Hercules II for around 200 watts output.  This combination, A6 and Herc 
II, 
make an extremely low distortion 200 watt station, virtually bullet proof and 
with a 
little work on my part making an interconnecting cable, the Herc will 
automatically 
follow the A6 from band to band.

I intended to use the A6 for battery operations since it is rated to operate 
down to 
9.5 volts, but I am so impressed with this thing that it may well become my 
primary 
station radio along with the Hercules II. 

It may sound like I have found the perfect radio.  Not quite.  One issue I have 
is 
zero beating the incoming signal on CW.  I've not yet found a way to do that 
with 
the radio only.  Currently I use my computer running a spectrum analysis 
program 
and tune to the frequency setting of my CW offset.  That works well but it's 
another 
piece of equipment that may not always be available.  If anyone knows how to 
zero 
beat using some built-in radio function, please speak up.

Well....those are my first impressions.  Ten-Tec has a winner in the Argonaut 
VI.  I 
hope they keep it in the line-up for many years to come.  There are seven hams 
in 
my family and we try to have similar rigs.  Maybe the Argonaut will be that rig 
in the 
future.  

I'll keep you posted on how things go.

73 from a happy camper,

-Lee-

WA3FIY




---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>