Excellent! I'm glad it worked out for you! It was good to review the
procedure since I haven't looked at it in years. It may inspire others on the
reflector to calibrate their radios to high standard they are capable of.
Ron Castro
N6IE
www.N6IE.com
Member:
ARRL
Redwood Empire DX Assn.
Northern California Contest Club
Northern California DX Foundation
Society of Broadcast Engineers
-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Jim M. via
TenTec
Sent: November 13, 2015 8:48 AM
To: tentec@contesting.com
Cc: Jim M.
Subject: Re: [TenTec] TT Synthesizer Accuracy (Orion 2)
Well, who would have thought? I did a master reset and ram clear, then
recalibrated to 10 Mhz wwv as described in the procedures. Now tuned
frequencies appear to be exact on other bands/frequencies! Sorry to waste
everyone's bandwidth. I should have done the resets earlier. Must be some
kind of adjustment factor in the firmware that got corrupted. I did update to
the latest firmware version last year and hadn't used the radio much since then
so I didn't notice the frequency discrepancies.
Moral of the story: When in doubt, master reset and ram clear.
73 Jim N4BE
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|