TenTec 555 Scout and 560 Corsair For Sale:
TenTec 555 "Scout" HF Transceiver:
The Scout is a relatively small 50 Watt output SSB and
CW HF Transceiver. It is simple and easy to operate,
but includes a CW electronic keyer, and of course TenTec's
legendary full break in QSK. It also has an innovative
"Jones filter" which has continuously variable bandwidth
from about 2500 Hz to 500 Hz. Individual "Band Modules"
are used to change bands, and to allow the operator to
choose only those bands he is interested in.
This particular Scout includes the optional 297 Noise Blanker,
and one band module of your choice. It works 100% and looks
extremely nice. You will need a magnifying glass to find any
scratches. Paper work and power cord also included for $325.
Band modules are available for 160, 80/75, 40, 30, 20, and
15 meters.
Extra band modules will be available after the Scout sells.
Model 700 Hand Mic. $35
.
.
TenTec Corsair 560 HF transceiver
Covers all HF bands 160 thru 10 meters, including the WARC
bands. NO general coverage receiver, as the receiver is
optimized for the ham bands. Although it has superb SSB,
and also has the absolute best QSK CW available. Many say
it has the best receiver made -- certainly in the top analog
receivers.
This one works as it should with full power output and excellent
receive. Cosmetically, it looks extremely nice. I do not find
any scratches.
It has a plastic spiral bound manual that includes the regular
TenTec manual, plus a considerable amount of extra info from
the internet.
Buy this gem for only $350.
TenTec 263 remote VFO
The 263 is used with the TenTec Corsair (or Corsair II). In
addition to the normal split operation, it also permits one
to receive on two frequencies simultaneously, and vary the
relative signal of the two frequencies.
This one works fine and looks great. Again, no scratches.
With paper work for $175.
TenTec 288, 1800 Hz crystal filter
The 288 is used in the Corsair, as well as other TenTec rigs
such as the Paragon. It is 1800 Hz wide, making it great for
narrow SSB, but it is also terrific for wide CW, and is ideal
for digital modes.
Of course it works fine. With paper work for $75.
Buy all three of the above for $575.
Astron RS-20 A, 20 amp Power Supply:
The Astron RS-20 A is a very common power supply around
most ham shacks. It provides 13 V DC for many ham rigs.
Features:
Solid State Electronically Regulated
Fold-Back Current Limiting Protects Power Supply from
...excessive current & continuous shorted output
Crowbar Over Voltage Protection
Excellent Regulation & Low Ripple at low line input voltage.
Heavy Duty Heat Sink
Chassis Mount Fuse
Three Conductor Power Cord
Specifications:
Input Voltage 105-125Vac
Output Voltage 13.8Vdc (internally Adjustable 11-15V)
Ripple Less than 5mV peak-peak (full load & low line)
Continuous Duty 16 Amps; ICS 20 Amps
Size 5" x 9" x 10-1/2"
This particular supply works great. It only varies 0.01 Volts
with a load! Cosmetically it looks great.
With paper work for only $65.
I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs,
antennas, etc. Just too many things to list here.
Please e-mail your requests.
Prices do not include shipping from Florida.
Thanks.
73,
Ken, W8EK
Ken Simpson
E-mail to W8EK@FLHam.net or W8EK@arrl.net
Voice Phone (352) 732-8400
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|