Here is how you replace the battery which will fix your problem.
http://tentecwiki.org/doku.php?id=565battery
73, Dan W4UH
Sent from my iPad
> On Mar 31, 2017, at 12:32 AM, Mike Schatzberg
> <cherokeehillfarm@earthlink.net> wrote:
>
> Change the backup battery behind the front panel.
>
> 73,
>
> Mike
> W2AJI
>
> Sent from my iPhone
>
>> On Mar 31, 2017, at 12:28 AM, Kevin Santine via TenTec
>> <tentec@contesting.com> wrote:
>>
>> My Orion 2 has worked flawlessly for many years. However very recently when
>> the rig is powered up it goes into a master reset (displayed on the boot
>> up screen as if it were intentionally done). I reloaded the latest firmware
>> as well as actually performed a ram clear followed by a master reset. No
>> help. The rigs parameters can be reset up after boot up and it does work
>> fine, however on the next power up, the same thing occurs. Any Ideas???
>>
>> Thanks,
>>
>> Kevin - AE5QU
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|