I fully agree that you should replace all if you have them.
Just a pointer:
If you carefully use a heat gun to just melt the solder on each encoder, each
will lift out really easily one-at-a-time and you won’t burn the board or lift
any solder pads.
Gary
> On Dec 11, 2017, at 4:32 PM, Tom <wa8wzg@wa8wzg.net> wrote:
>
> Thanks for the info, yes I plan on replacing all of them since I have to get
> that far into it,thanks again for everyone's help!!
>
> 73's
> Tom
>
> -----Original Message-----
> From: Barry N1EU <barry.n1eu@gmail.com>
> Sender: "TenTec" <tentec-bounces@contesting.com>Date: Mon, 11 Dec 2017
> 14:55:00
> To: Discussion of Ten-Tec Equipment<tentec@contesting.com>
> Reply-To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
> Subject: Re: [TenTec] Orion 2 multi turm pots
>
> For all the work needed to take everything apart to replace three, I would
> go ahead and replace all eight. The wiki mentions a Bourns replacement
> that should work okay and you can get ten of them for $18 from Mouser. The
> encoders we're dealing with here are just simple mechanical encoders. They
> are not the more expensive optical type encoders.
>
> Barry N1EU
>
> On Mon, Dec 11, 2017 at 2:13 PM, Dukes HiFi <dukeshifi@comcast.net> wrote:
>
>> I have two of them right here in my hands.
>>
>> $25 each shipped.
>>
>> Gary
>>
>>> On Dec 11, 2017, at 1:05 PM, Barry N1EU <barry.n1eu@gmail.com> wrote:
>>>
>>> They're all the same and there's info here:
>>> http://tentecwiki.eqth.net/doku.php?id=565enc
>>>
>>> 73, Barry N1EU
>>>
>>> On Mon, Dec 11, 2017 at 1:48 PM, Tom <wa8wzg@wa8wzg.net> wrote:
>>>
>>>> To All,, I bought used Orion 2 but it has the normal "flakey" multi turn
>>>> pots,,,, I need to replace 3 of them.. Question,, #1,, not having a
>> great
>>>> schematic,,, are all of them the same??? And Question #2,, does anyone
>> have
>>>> a source for them???
>>>> Thanks in advance,
>>>> And Happy Holidays to all,,,
>>>> Tom Wa8WZG
>>>> 73's
>>>> Tom
>>>> _______________________________________________
>>>> TenTec mailing list
>>>> TenTec@contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/tentec
>>>>
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|