| I agree with Bob's suggestions regarding the Molex connector.  There have been 
several threads regarding problems with this connector over the years and 
issues seem to be made worse by any strain on the power cable.  
You can find photo instructions for replacing the existing Molex connectors 
with Anderson Powerpoles at:
http://tentecwiki.eqth.net/doku.php?id=orion_molex_to_power_pole_mod 
73,
Mike, K9UW
Amherst, WI
-----Original Message-----
From: TenTec <tentec-bounces@contesting.com> On Behalf Of Bob McGraw K4TAX
Sent: Wednesday, September 26, 2018 4:45 PM
To: tentec@contesting.com
Subject: Re: [TenTec] Ten Tec 565 with Tuner
Check the 2 pin Molex connector on the radio.  With multiple insertions and the 
current draw, the tin contacts are noted to heat and loosen and thus not make 
good contact with the cable contacts.   Look for any discoloring on either 
connector.  If discoloring exists, replace both male and female connectors.
I'd replace the original connector with PowerPole circuit board mounting 
connectors and likewise, change the power cable connector.   Also, be sure the 
radio power cable is connected direct to the power supply and not through a DC 
Distribution panel or strip.
73
Bob, K4TAX
On 9/26/2018 3:45 PM, W5SJL Amos Favorite wrote:
> The Transceiver Went dark while receiving band activity
> No S meter Lamp
> No Led illuminated
> No Display Light
> No TX
> No Rx
> A very low sound when he power switch is set to on
> Main Power Fuse is good
>
> 566 works fine on the power cable and Power Supply.
>
> Electrolytic Caps on Power board are still ok
> --------------------------------------------
>   Is there another reset?
>
>
>
> Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
 |