Hi Pete,
Only the 7-segment displays are not working. No output data on (uP P1-7) and on
clock uP P1-6) are present from the uP to the two 7-segment display drivers
from the 5-pin connector. However, those two outputs also run to the PLL pcb
assy 81599 from another parallel 4-pin white connector. This afternoon, I
removed the PLL assy and changed out all the electrolytic capacitors.
Whenever I plug in the display board 5-pin connector to the logic board, the
meter backlight goes dim.
All the black push-button switches work enabling the associated tiny green
LED's, i.e., band, functions, filter selection, etc.
I'm putting everything back together in the OMNI VI this afternoon and I'll
e-mail you the results.
73's,
Greg W2GLS
Gregory Smith
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|