TenTec
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[TenTec] 238B dial and 238 red pully/pointer

from [Bill Acito] [Permanent Link][Original]
To: "TenTec@contesting.com" <tentec@contesting.com>
Subject: [TenTec] 238B dial and 238 red pully/pointer
From: Bill Acito <w1pa@hotmail.com>
Date: Mon, 23 Mar 2020 12:29:45 +0000
List-post: <mailto:tentec@contesting.com> 
Email sent, John. Thank you!
Folks, I don’t have a 3D printer…   is there anything I can do with this to 
help prep the design so we can make more in the future?  How do you go from an 
actual object to the file that the printers use? (trying to pay it forward)

Bill

Bill ACITO | W1PA
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [TenTec] Bill, I have the pointer you need and will send it to you if your QRZ address is ok. I got fed up with the crazy dial setup and put an old turns counter I had from many years ago on it. Doesn't look great, but it works.You might be able to find a turns counter on EBay or a surplus place, but they aren't cheap. MFJ has some tuner parts, but I haven't looked there. It's a possibility, but you have to adapt any you find.BTW, a fellow in EBay sells the pointer string and two nice led bulbs for a reasonable price. I'll go ahead and send the pointer and any associated parts when your address is verified. It is a good tuner, in my opinion! 73, John, K4AVXk4avx1@windstream.net********** **** *********TenTec] 238B dial and 238 red pully/pointer, John W. Farler
Next by Date:  Re: [TenTec] 238B dial and 238 red pully/pointer, Bud
Previous by Thread:  [TenTec] 238B dial and 238 red pully/pointer, Bill Acito
Next by Thread:  Re: [TenTec] 238B dial and 238 red pully/pointer, Bud
Indexes:  [Date] [Thread] [Top] [All Lists]