*Sorry I can't help you much further Karl but as you say there may be a
chance you've ran into driver or maybe USB hub conflict if you're using
one without an external psu...
Fyi I run Wintest peripherals from a bowered hub ie CAT control, Keyer,
keyboard and mouse with no problems on Win 7....
73
Malcolm F5VBU
*
*On 04/01/2021 23:55, Karl Heimbach wrote:
*
*Thank you Malcolm.
* *
I downloaded WinTest yesterday and gave it a try. I think the issue I
have is two FTDI dongles being used at the same time. One for a
Winkeyer and the other for a radio.
* *
I have an identical problem using the Winkeyer FTDI dongle and a FTDI
dongle with an Icom 735 or Xiegu G90. Sometimes it works and after
rebooting, it seldom works. I think the operating systems are mapping
instructions to the wrong FTDI device.
* *
It happens with the lastest Linux kernel and with Windows 10 Pro.
* *
DX Commander seems to work okay, but no Winkeyer access with it. N3FJP
Amateur Contact Log will work if I access the Omni VI using the hamlib
library.
* *
Haven't tried any other logging programs with the FTDI access to the
Omni. I have a couple of other radios connected to this PC using
conventional serial ports and everything works fine.
* *
If I remove the standard serial connection from either my Pegasus or
Argonaut V, and make up a cable as shown in the Omni VI manual , I
doubt if there will be an issue.
* *
I did download the latest evaluation copy of HRD to try, but $100
seems a little steep. The Pegasus Plus program will probably work
too, but it is very limited in being able to talk to other apps.
* *
I tried Pegasus Plus with my Pegasus and found it no better than the
original Ten-Tec app.
* *
I have the third Pegasus sold by Ten-Tec and also one of the original
Jupiters. I bought this Omni VI Plus when Ten-Tec first brought it out.
* *
I am mainly a CW person, but lately have had to use FT8 to make any
contacts.
* *
Regards,
* *
Karl - W5QJ
* *
On 1/4/2021 8:31 AM, Malcolm McLeman wrote:
*
*Not a hiccup using WinTest with Serial to USB cable and Prolific
driver since I bought the O6 uears aho..
*
*Not had the same success with Log4OM though.
*
*HNY to all.
Malcolm F5VBU
* *
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
*
*
*
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|