TenTec HF Transceiver, Power Supply, Filters, and more For Sale:
.
TenTec Pegasus Model 550 HF transceiver:
It covers 160 thru 10 meters, although it can be used
with a transverter for 6 and 2 meters, and will display
the 6 or 2 meter frequency on the screen.
It will transceive SSB, CW, FM, or AFSK, and receive AM.
Of course it is also ideal for digital modes such as PSK31,
pactor, FT-7, etc. It has 2 VFOs and 1000s of memories,
and full break-in on CW.
This rig is very close to a "software definable" rig, in that
most of the rig is controlled from the computer.
DSP filtering is provided, that is quite effective, so
no crystal filters are needed. Bandwidths go from
300 Hz to 8 KHz, with 1.5 to 1 shape factors, or better.
13 V DC at 20 amps needed.
This particular unit is in great condition. It looks and
performs almost like new. No scratches. TenTec operating
software is included, along with power cord and manual.
Only $435
.
TenTec 961 Power Supply/Speaker:
The TenTec 961 power supply is a linear power
supply (which means no switching noise is
possible) that provides 13.8 V DC at up to 20
amps continuous. It has both over voltage and
over current protection built in.
Cosmetically, it is made to match the 560/561
Corsair I and II, the 562 Omni V, the 563/564
Omni VI (all flavors), the 585/586 Paragon I
and II, and probably others. It has a nice
front facing speaker included, which improves
the sound considerably.
Electrically, it has the 4 pin, in-line power
connector which matches the above listed rigs,
plus many other TenTec rigs. It also has RCA
jacks for low current use.
This particular unit looks like new.
You would think it just came out of its box new.
No defects. Of course it works as it should.
With paper work for $125.
.
Crystal Filters for TenTec Rigs:
All of the following work as they should. They look great also.
TenTec Filters are $79 each, and Inrad Filters are $125 each.
.
The following are for the 9.0 MHz IF and fit
rigs such as the Omni series A, B, and C;
Omni V, Omni VI, VI +,
Argosy,
Paragon, Orion I and others.
TenTec 217 filter
500 Hz wide, CW filter
.
The following filters are for use in the 6.3
MHz IF and fit rigs such as the Corsair I
and II, Delta, Omni V VI 6+, and others.
TenTec 282 filter
250 Hz wide for narrow CW
TenTec 285 filter
500 Hz wide for CW
TenTec 288 filter
1800 Hz wide for narrow SSB or wide CW
.
InRad Crystal Filters for TenTec:
The following InRad Filters are available. They all
work as they should. They fit TenTec rigs as indicated,
and look like new. They may in fact be new, as
they are still in their original boxes. They are
$125 each, plus shipping from Florida.
The following are for the 9.0 MHz IF and fit
rigs such as the Omni series A, B, and C; Omni V,
Omni VI, VI +, Argosy, Paragon, Orion I and others.
InRad #760 (replaces TenTec 219)
250 Hz for narrow CW
.
The following filters are for use in the 6.3
MHz IF and fit rigs such as the Corsair I and II,
Delta, Omni V, VI, 6+, and others.
InRad #750 (replaces TenTec 285)
400 Hz for CW
InRad #761 (replaces TenTec 282)
250 Hz for narrow CW
.
I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, connectors, miscellaneous accessories,
etc.
Just too many to list here. Please e-mail your requests.
.
Prices do not include shipping from Florida.
Thanks.
73,
Ken, W8EK
Ken Simpson
E-mail to W8EK@FLHam.net or W8EK@arrl.net
Voice Phone (352) 732-8400
.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|