Hi Folks
A bit puzzled by the component / circuit diagrams in the user hand book
of the Jupiter, the PCB 81889 Rev A board shows Q20 as being a 2SC1971
whereas the 3 legged fuse fitted on my board is a RD06HHF1!.
The PA board 81897 also shows finals as being SD1405, mine are MRF454
even the drivers that are supposed to be 2sc3133 are different.
So my question(s) is/are, did changes take place during the assembly run
for this model to either or both of these boards.
As always advice greatly appreciated
Snowy
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|