Feb 23rd WA8VSJ suggested I check the key socket and investigate the internal
keyer. I have not gotten inside the case yet - limited time.
I did go to the menu. The CW KEYER was turned to "OFF". I switched it to
"Mode A"; still continued RF output. I switched it to "Mode B", still
continued RF output. Same results with the key plug inserted or removed. I
returned the switch to "OFF".
Using the menu I switched the TRANSMITTER from "ON" to 'OFF'. The RF output
continued!! I returned the switch to "ON".
Using the menu I switched the KEYING LOOP from "OFF" to "ON". The transmitting
stopped and the receiver was working as normal. Put the key plug in; keying
had no effect.
Hopefully I'll have time this weekend to get the case off.
Thanks & 73
Mac WQ8U Hillsborough, NC
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|